The AirSense 10 CPAP Machine with HumidAir Heated Humidifier by ResMed builds upon previous successes and adds innovative new features sure to impress. The heated humidifier is built in making it 23% lighter than former models and features increased levels of custom humidification.
Res Med AirSense S10 Elite CPAP Machine with HumidAir Humidifier
The AirSense 10 CPAP Machine with HumidAir is a polished looking machine and built-in humidifier designed with user experience in mind. Easily understood menus, SmartStart™, and quiet operations are a few of the features that make this CPAP a great option. This is a single pressure CPAP machine that does not auto-adjust.
- HumidAir™ Heated Humidifier
- OPTIONAL ClimateLineAir™ Heated Tube
- Color LCD Display
- Integrated Light Sensor
- Expiratory Pressure Relief (EPR™)
- Therapy Data
HumidAir™ Heated Humidifier
The AirSense™ 10 CPAP Machine has a heating plate built in so the water chamber can be attached directly to the machine for a minimal footprint. The humidifier can be set to 9 different settings: off, and 1 through 8 with 1 being the lowest level of humidification, and 8 being the highest.
Take humidification to the next level by adding the OPTIONAL ClimateLineAir integrated heated tube to maintain the temperature of the entire air circuit. The Auto Climate Control mode will consider the room temperature and adjust the level of humidification delivered to the mask.
One of the most innovative features of the AirSense™ 10 line is AutoRamp™ technology. Algorithms allow the machine to sense when the user is awake or asleep, and once asleep will comfortably rise to the full prescribed pressure. See the Important Tips tab of this page for a more detailed explanation of the AutoRamp™ setting.
For added convenience the AirSense™ 10 CPAP features SmartStart™ technology. Simply put on the mask and start breathing and the machine will begin therapy. Similarly, when the mask is taken off, the machine will register the user is no longer using the machine and turn off.
Color LCD Display with Integrated Light Sensor
The LCD display of the AirSense™ 10 CPAP features vibrant colors to help clearly identify different stages of therapy. A blank circle fills with green as therapy pressure ramps up. Green and red faces indicate proper or poor mask fit and are also used to indicate if the humidifier is working properly.
The machine also features a integrated light sensor which allows the screen to adjust brightness automatically when ambient light changes. If a restroom break is needed in the middle of the night, the screen won’t blind with brightness, and in the morning it won’t be too dim to read how therapy went. In addition, the screen will automatically turn off after a short time to avoid extra light in a dark room.
Expiratory Pressure Relief (EPR™)
Now a mainstay on ResMed machines, EPR™ is intended to make therapy more comfortable. Breathing out against full prescribed pressure can sometimes be uncomfortable. EPR™ steps in and helps by lowering the pressure by a set amount on exhalation.
The AirSense™ 10 CPAP provides basic therapy data on the LCD Display such as AHI, nightly usage hours, and total usage hours.
CPAP Video & FAQ[youtube id="gOGkJvSPhsM&list=UUwjFC_AikD4--KeVnU7mbJg" width="600" height="350"] [youtube id="RzCskdfN46k&list=UUwjFC_AikD4--KeVnU7mbJg" width="600" height="350"] [youtube id="YcieMbspXYo&list=UUwjFC_AikD4--KeVnU7mbJg&index=14" width="600" height="350"]
This Product Includes...
- CPAP Machine
- Built-In HumidAire Heated Humidifier
- Standard Humidifier Chamber
- SlimLine Tubing - 15mm Diameter
- Power Supply and Cord
- Travel Bag
- 1- Standard Filter (Installed)
- Filter Cover
- SD Card - Inserted in Machine
- Patient Manual
- Ramp: Auto
- Start Pressure: 4 cm H2O
- Humidity Level: 4
- Mask Type: Pillows
- EPR: Off
- SmartStart: Off
- Tube Type: Slimline
- Antibacterial Filter: No